The improvement of life has made people have higher requirements for the products used. For this reason, many components have begun to use ceramic structural parts. Because of the superior performance of ceramic structural parts, it is especially suitable for use under severe Conditions. Because of the superior performance of ceramic structural parts, it is especially suitable for use under severe conditions. And what processes are used in the production of ceramic structural parts? 

1. Ceramic dry pressing

  Dry press molding uses pressure to compress ceramic powder into a shaped body. Under the action of external force, the powder particles are close to each other in the mold, and are firmly combined by internal friction to maintain a certain shape. The main defect in dry pressed greens is cracking due to internal friction between thepowder and friction between the powder and the mold wall.It mainly produces lightweight, high-rigidity flat-shaped ceramic products. Dry press molding has high production efficiency, is suitable for mass production, has low cost, high material utilization rate, and good shearability and recovery. 

2. Ceramic injection molding

  This type of molding is similar to plastic molding. It is a new process for preparing ceramic parts by combining the polymer injection molding method with the ceramic preparation process. It mainly produces small precision ceramic parts with complex shapes, precise dimensions or with inserts, which has high production efficiency. However, its feeding formula, mixing and mold development are difficult. The mold design and injection filling effect directly affect the quality of green part. 

3. Ceramic casting molding

  Tape casting is an important forming method for thin-film ceramic materials.It has the advantages of high speed, high degree of automation, high efficiency,uniform structure and good product quality. Tape casting has become the main way to produce multilayer capacitors and multilayer ceramic substrates.